Reasons Why Your DIY Epoxy Flooring Might Fail

Nowadays, there are many DIY kits available for epoxy coating. In general, epoxy coating is very popular among people in Oklahoma. This is because this coating is very affordable and relatively easy to apply. People have started thinking that using it themselves will cut costs. That is not good for your floor and can cause massive problems later.

Later, you might notice peeling and tearing in your epoxy flooring within a short period of time. Usually, the reason for epoxy failure varies, but mostly it is because you have installed it yourself. You should consider epoxy garage floor installers to install your epoxy to ensure the quality of the work. The following article explains some common reasons for epoxy failure.

Bad Surface Preparation

Most DIY epoxy boxes from big box stores instruct the user just to clean the floor. Some epoxy paint kit teaches to clean it with muriatic acid, but it is not enough. Just cleaning the floor will not make the floor ready for epoxy. A valid preparation Almost all epoxy garage floor installers know a valid preparation method, which is mandatory.

Cleaning with acid only works if the concrete’s pores are open. This will allow the acid to go inside and remove the laitance. This method does not suffice if the floor receives painting, sealing, or oil staining. The epoxy floor needs normal profile preparation to achieve its mechanical bond. They use a shrouded concrete grinder to ensure a concrete surface profile. The installer uses a heavy shot blaster if the concrete witnesses higher contamination.

Temperature

There are specific requirements for the epoxy installation to occur correctly. The epoxy garage floor installers know the right temperature to install it. You cannot install this flooring in extreme hot or cold temperatures. You also have to ensure that the surface does not have any foreign material like grease or oil for proper installation.

Weak Layer

Mostly, people whose epoxy fails have done the flooring in aged concrete. When the shine wears out, people decide to apply a new epoxy coating to rejuvenate their garage floor. This can create a different kind of problem, especially in the future.

This will cause the cement to get torn apart because the epoxy will be stronger than the substrate. The epoxy garage floor installers can tell you how it can affect timber. Wood is more flexible than epoxy, so there is a high chance that the floor might break. It won’t be able to follow the expansion of the wood floor.

Get Them to do it for You

Here at Zone Garage, we have the best installers in their team with the polyaspartic and polyurea (better than epoxy floor coating.) Call to get your free estimate today.