How Do I Resurface My Garage Floor?
Generally, most people prefer concrete as a garage flooring element. If you install the concrete on the surface of the floor, then it can last for many years. But it is still prone to wear and tear. After dealing with heavier objects for years, the garage surface can be cracked and pitted. If you want to reinforce the floor, then you should install Garage floor epoxy. You should hire professionals who have experience in garage floor resurfacing to get the best outcome. Here we have shared the steps of resurfacing the garage floor.
Required Tools
power mixer
Pressure washer
Bucket
floor squeegee
Push broom
Trowel
The Material
Concrete crack sealer
Resurfacer
Concrete cleaner
The Method
Step One - Buy the Components
First of all, you should buy these materials before starting to resurface the floor. The following materials are resurfacer, plastic sheeting, brush and push broom, squeegee, protective gear, concrete cleaner, mixing equipment and pressure washer. When buying the resurfacer you should check the label so that it can cover the whole floor.
Step Two - Clean the Slabs and Fill the Cracks and Holes
After that, you should clean the slabs by using a stiff brush and concrete degreaser. Then rinse the floor at least two times to remove the elements properly.
Step Three - Now Find the Pits
You should create a marked size of 1/4 in. from the tip of a pencil. You can use the technique as a depth gauge to identify the locate pits and circle them. After that, you should chisel away if there are any loose elements around the craters and cracks.
Step Four - Fill the Craters, Cracks and Pits
Now, you have to mix the resurfacer with the water and fill the cracks, craters and pits. Keep in mind that you have to add a specific amount of water to make the workable consistency. After that, you may have to take some time to dry the patches. How much time it takes completely depends upon the weather.
Apply the Resurfacer
You have to mist the concrete in a particular way so that it remains wet. Then you can be assured that the concrete will not absorb the water from the mixture. After that, you have to mix the resurfacer by using corded drills to blend it well. Next, you have to spray it smoothly over the surface and let the thing set. You should apply the resurfacer very quickly because the mixture can dry within 30 minutes. You should not cover the weather stripping joints between the slabs.
Contact Us
If you want to get a new smooth beautiful garage floor at a reasonable price, then contact Zone Garage. The experts can recommend to you what elements to use and also suggest important tips about garage floor resurfacing.