Common Reasons for Epoxy Floor Coating Failure
You may have heard a lot about residential epoxy flooring and you finally decide to install the industrial flooring. But now you do not know how to take care of the flooring. If you want to make sure that the epoxy flooring lasts long, you need to pay attention to the installation process. People are choosing epoxy concrete floor over normal flooring because of the durability and low maintenance of epoxy flooring. However, it is necessary for you to apply the coating properly. Inappropriately applied coating can actually result in more loss than gain.
Here are a few reasons that epoxy floor coating fails:
Incorrect Preparation Of The Surface:
If you are buying the residential epoxy flooring, you will get an instruction on how to prepare your flooring for installation. You will need to wash the surface with muriatic acid. But cleaning with acid is not the ultimate step always. If the floor you chose has pores through which the acid can go inside the cement surface and remove it, acid etching is the best possible preparation method. But if the floor is contaminated with wax, oil stains, tire shine, paint, etc., you will not get any result from acid etching. As a result, when you apply epoxy coating, the coating does not adhere to the smooth surface. This caused all your efforts to go in vain.
Adulterated Concrete:
Apart from improper preparation method, there is another common reason why your epoxy concrete floor may fail. If the concrete is adulterated with contaminants such as acrylics, fatty acids, siloxane, silicones, etc., the epoxy flooring may not work. These can affect the performance of the adhesive even if you follow the correct methods of preparing the surface. As a result, the epoxy flooring will not apply correctly nor will it last long.
Extreme Humidity:
If you live in an area that is extremely humid, you may not get a good result from applying epoxy floor coating. Humidity can have serious impact on the strength of the bond between the layers. Hence, you will almost surely witness cloudiness and delamination, which can result in inappropriate curing.
Improper Mixing:
One of the most common reasons of epoxy floor failures, especially in DIY projects, is improper mixing of the products. When you are choosing a floor coating, you need to measure the elements properly. Not only do you need to mix the products in their instructed ratios, but also you need to be careful about air getting mixed with the products.
If you want to get the best result from your epoxy floor coating, choose a professional epoxy installer such as Zone. Contact us today.